How to calibrate your Android battery

The battery is a key component of HP and other modern portable devices. The battery used by HP is a rechargeable battery. It's just that the battery can not always be used to alias a lifetime.

Over time, the service life of the battery will continue to decline. Especially if the device is used on a daily basis too, life can be faster decreases. The systems on the new devices are usually able to read the status of the battery properly. But when the battery is just beginning, the system may have trouble reading the battery status accurately. If this is the case, the battery may be time to calibrate.

What the battery calibration?


Users of smartphones with Android OS can know the status of the battery of the device is used. Only the system are not always accurate in reading the state of the battery. There are times when the data displayed are sometimes inappropriate. For example, the battery status indicates that the power is always available to 90% and can last up to 12 hours in the future, but it is found that the phone was dead soon because it lacked power .

If you encounter this kind of thing, then you can calibrate the battery Android phone that you use. So what is the calibration of the battery? In short, the calibration of the battery is the battery standardization process so that the actual condition of the back can be read accurately by the system. Do you need to calibrate your battery?

Previously, you must determine why the performance of your battery HP has declined, is due to the calibration of the Android system or the battery itself? If the system failed to read the state of the battery properly then the calibration may be necessary. Conversely, if the battery is completely damaged, the best way is to replace it. How to calibrate the HP battery is pretty easy to do alone, without the need to come to the unit's service center. In addition, battery calibration results may also be able to help you determine if you need to buy a new device. Just keep in mind that the battery calibration is not going to improve battery performance, but only using the playback system of the battery status accurately again. How to calibrate your Android battery

Your Android Battery Calibration can be done in several ways, either with root access or not. Note that there is no standard for this calibration standard Android battery or the device manufacturer and the battery manufacturer itself. Here are two ways of calibrating Android battery that you can try.

1. No root access


How to calibrate your Android battery simplest and most common is to charge the battery until it is completely and then disconnect it (without removing the battery, but the disconnect). This way, you can do it without needing root access, making it easier and faster. Here are the steps.


  • Let your device runs out of battery to death by himself. 
  • Charging the battery without turning on the device and let it fully charged until the screen indicator displays the 100% number. 
  • Unplug the charger from the device. 
  • Turn on the device. If it is found that the battery indicator on the display does not show 100% charge the battery until the indicator shows a number of 100%. 
  • Let your machine stay alive. Unplug the charger device and restart it. If the battery indicator does not show returned 100%, the battery recharges to 100%. 
  • You can repeat this cycle until the battery indicator displays a number of 100% after the device is restarted without connecting the charger. 
  • Then let the device without being recharged until the battery is empty and death itself. 
  • Then comes the battery up again, without interruption. 


Well, that's how the calibration of the Android battery without easy access root. It should be noted that it is advisable not to carry out this process on a regular basis.
If it is too often do the above, you may have a bigger problem with the device you use. Leaving your phone or tablet vacuum to cause your device to turn off is not good, and vice versa. Nevertheless, there is good news you need to know.

It is mentioned that the battery in modern appliances off automatically when it reaches its safe limit. In addition, the battery still has power backup, even if the unit does not operate. Again, what the battery calibration when absolutely necessary, as it has a negative impact on the life of the battery.

2. With root access


How to calibrate your Android battery can also be done with root access. This second method is essentially the same process as the root without method above, but here you have to use a third party application that requires root access to make it more reliable.

Unfortunately, it is mentioned that the third-party application requests a very large list of permissions of the device. If you are worried for the safety of the device you use, you should not do it. Although our recommended least we still present the steps below.


  • Let your device runs out of battery to death by himself. 
  • Charging the battery without turning on the device and let it fully charged until the screen indicator displays the 100% number. 
  • Unplug the charger from the device. 
  • Turn on the device. If it is found that the battery indicator on the display does not show 100% charge the battery until the indicator shows a number of 100%. Let your machine stay alive. 
  • Unplug the charger device and restart it. If the battery indicator does not show returned 100%, the battery recharges to 100%. 
  • You can repeat this cycle until the battery indicator displays a number of 100% after the device is restarted without connecting the charger. 
  • Then install the calibration application of the battery that you can download here. 
  • Before running, make sure that the indicator of the battery of your device is 100%. After running, restart the device. 
  • Once the device is restarted, run the application immediately and recalibrate the battery of your device. 
  • Once the calibration is complete, let the battery be your vacuum unit without charging and let off by itself. Then recharge to full again in a dead state without any interruption. The percentage of the battery Android system is reset. 


Well, this is another way to calibrate your Android battery using third-party applications that require root access. Again, we are less available this way because it might be less safe for your device.

Someone who likes to read, write, and do things related to the world of technology.

Disqus Comments